i. CPA. Motor start CPA type

ii. CPR. Motor start CPR type

iii. CPT. Motor start CPT type

 

ii. CPR. Motor start CPR type

 

Outline Drawing

Construction

Appearance

 

CPR is self-healing cylindrical construction capacitor, which is wounded with metalized polypropylene film dielectric, flame retardant resin seal. These capacitors are especially designed primarily for used in single phase.

Features:

• For motor application
• Flame retardant plastic case
• Epoxy resin end seal

Specification:

• Operating temperature: -40°C ~ +85°C (metalized polypropylene film)
• Capacitance range: 0.75µF ~ 35µF
• Capacitance tolerance: ±5% (J); ±10% (K); ±150% (U);  ±100% (X); ±20% (M)
• Rated voltage: 100VAC ~ 600VAC for UL; 400VAC, 450VAC for VDE
• Dissipation factor: 0.1% max at 1KHz 25°C (metalized polypropylene film)
• Insulation resistance:
  Between terminals        
  C>1.0μF 1000MΩXμF/100VDC 60s            
  C≦1.0μF 1000MΩ/100VDC 60s
  Terminals to case ≧2000MΩXμF/100VDC
• Withstanding standard:
  Between terminals: Rated voltage x 2.15VAC 10sec for VDE
  Between terminals: Rated voltage x 1.5VAC 10sec for UL
  Terminals to case: Rated voltage x 2+1000VAC (min 2000VAC) 60sec

                                               

Performance:

Test Characteristics	Test Method JIS C 4908	Performance
Withstand voltage: Between terminals	Apply 1.5 times of rated voltage for 10 sec for UL. Apply 1.5 times of rated voltage for 10 sec for VDE Charge discharge current must be 1A max	Shall be no abnormality (Promise intermittent self-healing)
Withstand voltage: Between terminals & enclosure	Apply rated voltagex2+1000VAC (2000VAC min) For 60s	Shall be no abnormality
Insulation resistance: Between terminals	Apply voltage 100VDC for 60s	≤1.0μF 1000MΩ; >1.0μF 1000MΩ*μF
Insulation resistance: Between terminals & enclosure	Apply voltage 100VDC for 60s	2000MΩ
Humidity test: Appearance Shall be no abnormality	Temperature: 40±3℃; Humidity: 90-95% RH Testing time: 500±12 Hrs. After testing, leave it for 1Hrs or more but within 2Hrs at standard condition Withstand voltage is 150% rated voltage, 10 sec.	Shall be no abnormality
Humidity test: Withstand voltage		Shall be no abnormality
Humidity test: Insulation resistance		≥1000MΩ
Humidity test: Dissipation factor		Increased value shall be 0.5x10-3 max
Humidity test: Rate of variation capacitance		Within ±5% of the value before test
Endurance test: Appearance	Temperature: Maximum permissible temperature ±3℃ Test voltage : Rate voltage x 1.25 Test time: (+24; -0) 600Hrs	No remarkable abnormality
Endurance test: Capacitance		Rate of variation to initial value shall be within ±5%
Endurance test: Dielectric dissipation factor at high temperature		Rate of increase to initial value shall be max 1.2. However, for capacitor using plastic film only as dielectric, increased value shall be 0.5x10-3 max
Reference Standard	UL-810; EN60252

 

Dimensions:

100VAC ~ 250VAC
Part No.	Cap. µF	Dimensions (mm)		UL	CUL	VDE
		D	H
CPR0505□6BB6□□□□□□	5.0	26.0	40.0	Y	Y
CPR0825□6BC0□□□□□□	8.2	30.0	55.0	Y	Y
CPR0875□6BB5□□□□□□	8.7	25.0	59.0	Y	Y
CPR12R3□6BC1□□□□□□	12.3	31.0	52.0	Y	Y
CPR14R5□6BC0□□□□□□	14.5	30.0	60.0	Y	Y
CPR21R5□6BC5□□□□□□	21.5	35.0	60.0	Y	Y
CPR0306□6BD2□□□□□□	30.0	42.0	75.0	Y	Y
CPR0356□6BD6□□□□□□	35.0	46.0	60.0	Y	Y

 

250VAC ~ 300VAC
Part No.	Cap. µF	Dimensions (mm)		UL	CUL	VDE
		D	H
CPR0355□8BB6□□□□□□	3.5	26.0	40.0	Y	Y
CPR0575□8BC0□□□□□□	5.7	30.0	55.0	Y	Y
CPR0685□8BB5□□□□□□	6.8	25.0	59.0	Y	Y
CPR0865□8BC1□□□□□□	8.6	31.0	52.0	Y	Y
CPR0106□8BC0□□□□□□	10.0	30.0	60.0	Y	Y
CPR0156□8BC5□□□□□□	15.0	35.0	60.0	Y	Y
CPR0216□8BD2□□□□□□	21.0	42.0	75.0	Y	Y
CPR0296□8BD2□□□□□□	29.0	42.0	75.0	Y	Y
CPR0236□8BD6□□□□□□	23.0	46.0	60.0	Y	Y

 

300VAC ~ 350VAC
Part No.	Cap. µF	Dimensions (mm)		UL	CUL	VDE
		D	H
CPR0255□6CB6□□□□□□	2.5	26.0	40.0	Y	Y
CPR0435□6CB5□□□□□□	4.3	25.0	59.0	Y	Y
CPR0485□6CC0□□□□□□	4.8	30.0	55.0	Y	Y
CPR0625□6CC1□□□□□□	6.2	31.0	52.0	Y	Y
CPR0105□6CC5□□□□□□	10.0	35.0	60.0	Y	Y
CPR0156□6CD2□□□□□□	15.0	42.0	75.0	Y	Y
CPR0176□6CD6□□□□□□	17.0	46.0	60.0	Y	Y

 

350VAC ~ 400VAC
Part No.	Cap. µF	Dimensions (mm)		UL	CUL	VDE
		D	H
CPR0185□8CB6□□□□□□	1.8	26.0	40.0	Y	Y
CPR0335□8CB5□□□□□□	3.3	25.0	59.0	Y	Y
CPR0385□8CC0□□□□□□	3.8	30.0	55.0	Y	Y
CPR0475□8CC1□□□□□□	4.7	31.0	52.0	Y	Y
CPR0555□8CC0□□□□□□	5.5	30.0	60.0	Y	Y
CPR0825□8CC5□□□□□□	8.2	35.0	60.0	Y	Y
CPR11R5□8CD2□□□□□□	11.5	42.0	75.0	Y	Y
CPR0176□8CD6□□□□□□	17.0	46.0	60.0	Y	Y

 

400VAC ~ 450VAC
Part No.	Cap. µF	Dimensions (mm)		UL	CUL	VDE
		D	H
CPR0155□6DB6□□□□□□	1.5	26.0	40.0	Y	Y	Y
CPR0255□6DC0□□□□□□	2.5	30.0	55.0	Y	Y	Y
CPR0375□6DC1□□□□□□	3.7	31.0	52.0	Y	Y	Y
CPR0445□6DC0□□□□□□	4.4	30.0	60.0	Y	Y	Y
CPR0655□6DC5□□□□□□	6.5	35.0	60.0	Y	Y	Y
CPR0905□6DD2□□□□□□	9.0	42.0	75.0	Y	Y	Y
CPR0106□6DD2□□□□□□	10.0	42.0	75.0	Y	Y	Y
CPR0176□6DD6□□□□□□	17.0	46.0	60.0	Y	Y	Y

 

450VAC ~ 500VAC
Part No.	Cap. µF	Dimensions (mm)		UL	CUL	VDE
		D	H
CPR0105□8DB6□□□□□□	1.0	26.0	40.0	Y	Y	Y
CPR0205□8DB5□□□□□□	2.0	25.0	59.0	Y	Y	Y
CPR0305□8DC1□□□□□□	3.0	31.0	52.0	Y	Y	Y
CPR0355□8DC0□□□□□□	3.5	30.0	60.0	Y	Y	Y
CPR0505□8DC5□□□□□□	5.0	35.0	60.0	Y	Y	Y
CPR0655□8DD5□□□□□□	6.5	35.0	60.0	Y	Y	Y
CPR0705□8DD2□□□□□□	7.0	42.0	75.0	Y	Y	Y
CPR0805□8DD6□□□□□□	8.0	46.0	60.0	Y	Y	Y

 

500VAC ~ 600VAC
Part No.	Cap. µF	Dimensions (mm)		UL	CUL	VDE
		D	H
CPR0754□8EB6□□□□□□	0.75	26.0	40.0	Y	Y	Y
CPR0155□8EB5□□□□□□	1.5	25.0	59.0	Y	Y	Y
CPR0205□8EC1□□□□□□	2.0	31.0	52.0	Y	Y	Y
CPR0255□8EC0□□□□□□	2.5	30.0	60.0	Y	Y	Y
CPR0355□8EC5□□□□□□	3.5	35.0	60.0	Y	Y	Y
CPR0505□8ED2□□□□□□	5.0	42.0	75.0	Y	Y	Y
CPR0555□8ED6□□□□□□	5.5	46.0	60.0	Y	Y	Y

back to top