Product - Capacitors
Product - Resistors
Trading Product
Service
Wire Harness

OEM Service
The OEM department specializes designing and manufacturing capacitors. We supply kinds of capacitors. Welcome to OEM services, please tell your demand, and we will feedback in 24 hours. Please contact us: ctcheam@camelcom.com.my.

C. Polypropylene Film Capacitor Series
i. PPL. Polypropylene film capacitor - inductive-radial dipped
ii. PPN. Polypropylene film capacitor - radial dipped
iii. PPT. Polypropylene film capacitor - axial tubular

 

iii. PPT. Polypropylene Film Capacitor - Axial Tubular

PPT are constructed with polypropylene film dielectric, aluminum foil electrode, copperply lead , outer wrapt by
polyester film tape and ends sealed by epoxy resin electronics as precision timing & oscillation circuit, signals coupling, bypassing circuit.

Drawing:

Outline Drawing
Construction
Appearance

 

Features:

  • Negative temperature coefficient can be used in critical circuits
  • Excellent long term stability and high reliability

Specification:

  • Operating temperature: -40℃~85℃
  • Capacitance range:0.001μF~0.47μF
  • Capacitance tolerance:±5%(j), ±10%(K), ±20%(M)
  • Rated voltage(RV): 50VDC, 100VDC, 250VDC, 400VDC,630VDC
  • Dissipation factor: 0.1% Max at 1KHZ, 25℃
  • Insulation resistance(IR):≥30000 MΩ (C≦0.1µF) ≥3000 MΩ·µF (C>0.1µF)

Performance:

Test Characteristics Test Methods JIS C 5102 Performance
Withstand voltage: Between terminals Apply 1.5 times of rated voltage for 60 sec. Charge discharge current must be 1A max Shall be no abnormality
Withstand voltage: Between terminals & enclosure Apply 2.0 times of rated voltage for 1 to 5 sec Shall be no abnormality
Insulation resistance: Between terminals Apply rated voltage ±15% for 60 sec. when rated voltage under 100V. Apply 100V ±15% when rated voltage from 100V to 500V at 20℃ ≤0.1µF ≧30,000MΩ (2E 2G 2J)
>9000MΩ (2A)
Insulation resistance: Between terminals & enclosure >0.1µF ≧10,000MΩ• µF (2E 2G 2J)
>3000 MΩ• µF (2A)
Heat proof: Insulation resistance at 85℃ Testing temperature: 85±2℃ ≤0.1µF≧900MΩ at 85℃
>0.1µF≧300MΩ•µF at 85℃
Heat proof: Rate of variation of capacitance at 85℃ Within +5% -2% of the value before test
Humidity test: Appearance Temperature: 40±2 ; Humidity: 90-95% RH
Testing time: 500 +24 -0 Hrs.
Apply voltage: rated voltage. After testing, leave it for about 16 Hrs. at standard condition Withstand voltage is 130% rated voltage, 60 sec.		 Shall be no abnormality
Humidity test: Withstand voltage Shall be no abnormality
Humidity test: Insulation resistance ≤0.1µF≧2700MΩ
>0.1µF≧9600MΩ•µF
Humidity test: Dissipation factor 0.011 (1.1%) Max.
Humidity test: Rate of variation capacitance Within ±10% of the value before test
Reference Standard GB 10188 (IEC 60384-13) / JIS C 5102

Dimensions:

50VDC/100VDC
Part No. 
Cap.(µF) 
Dimensions(mm) 
OD 
L 
dФ 
PPT102□2A-5A4□□□□□ 
0.0010
5.0
14.0
0.6
PPT152□2A-5A4□□□□□ 
0.0015
5.0
14.0
0.6
PPT222□2A-5A4□□□□□ 
0.0022
5.0
14.0
0.6
PPT332□2A-5A4□□□□□ 
0.0033
5.0
14.0
0.6
PPT472□2A-6A4□□□□□ 
0.0047
6.0
14.0
0.6
PPT682□2A-9A4□□□□□ 
0.0068
6.0
14.0
0.6
PPT103□2A-6A4□□□□□ 
0.010
6.0
14.0
0.6
PPT153□2A-7A4□□□□□ 
0.015
7.0
14.0
0.6
PPT223□2A-7A4□□□□□ 
0.022
7.0
14.0
0.6
PPT333□2A-8A4□□□□□ 
0.033
8.0
14.0
0.6
PPT473□2A-9A6□□□□□ 
0.047
9.0
16.0
0.6
PPT683□2AA1A6□□□□□ 
0.068
11.0
16.0
0.8
PPT104□2AA0B1□□□□□ 
0.10
10.0
21.0
0.8
PPT154□2AA2B1□□□□□ 
0.15
12.0
21.0
0.8
PPT224□2AA3B7□□□□□ 
0.22
13.0
27.0
0.8
PPT334□2AA5B7□□□□□ 
0.33
15.0
27.0
0.8
PPT474□2AA6C2□□□□□ 
0.47
16.0
32.0
0.8

250VDC
Part No. 
Cap.(µF) 
Dimensions(mm) 
OD 
L 
dФ 
PPT102□2E-5A4□□□□□ 
0.0010
5.0
14.0
0.6
PPT152□2E-5A4□□□□□ 
0.0015
5.0
14.0
0.6
PPT222□2E-5A4□□□□□ 
0.0022
5.0
14.0
0.6
PPT332□2E-5A4□□□□□ 
0.0033
5.0
14.0
0.6
PPT472□2E-6A4□□□□□ 
0.0047
6.0
14.0
0.6
PPT682□2E-6A4□□□□□ 
0.0068
6.0
14.0
0.6
PPT103□2E-7A4□□□□□ 
0.010
7.0
14.0
0.6
PPT153□2E-7A6□□□□□ 
0.015
7.0
16.0
0.6
PPT223□2E-8A6□□□□□ 
0.022
8.0
16.0
0.6
PPT333□2EA0A6□□□□□ 
0.033
10.0
16.0
0.6
PPT473□2EA0B1□□□□□ 
0.047
10.0
21.0
0.6
PPT683□2EA1B1□□□□□ 
0.068
11.0
21.0
0.8
PPT104□2EA2B7□□□□□ 
0.10
12.0
27.0
0.8
PPT154□2EA4B7□□□□□ 
0.15
14.0
27.0
0.8
PPT224□2EA6B7□□□□□ 
0.22
16.0
27.0
0.8
PPT334□2EA5C2□□□□□ 
0.33
15.0
32.0
0.8
PPT474□2EA9C2□□□□□ 
0.47
19.0
32.0
0.8

400VDC
Part No. 
Cap.(µF) 
Dimensions(mm) 
OD 
L 
dФ 
PPT102□2G-5A4□□□□□ 
0.0010
5.0
14.0
0.6
PPT152□2G-5A4□□□□□ 
0.0015
5.0
14.0
0.6
PPT222□2G-5A4□□□□□ 
0.0022
5.0
14.0
0.6
PPT332□2G-6A4□□□□□ 
0.0033
6.0
14.0
0.6
PPT472□2G-7A4□□□□□ 
0.0047
7.0
14.0
0.6
PPT682□2G-8A4□□□□□ 
0.0068
8.0
14.0
0.6
PPT103□2G-8A6□□□□□ 
0.010
8.0
16.0
0.6
PPT153□2G-9A4□□□□□ 
0.015
9.0
16.0
0.6
PPT223□2GA0A6□□□□□ 
0.022
10.0
16.0
0.6
PPT333□2GA2B1□□□□□ 
0.033
12.5
21.0
0.8
PPT473□2GA4B1□□□□□ 
0.047
14.0
21.0
0.8
PPT683□2GA2B7□□□□□ 
0.068
12.0
27.0
0.8
PPT104□2GA4B7□□□□□ 
0.10
14.0
27.0
0.8
PPT154□2GA7C7□□□□□ 
0.15
17.0
27.0
0.8
PPT223□2GA8C2□□□□□ 
0.22
18.0
32.0
0.8
PPT333□2GB0C2□□□□□ 
0.33
20.0
32.0
0.8

630VDC
Part No. 
Cap.(µF) 
Dimensions(mm) 
OD 
L 
dФ 
PPT102□2J-5A4□□□□□ 
0.0010
5.0
14.0
0.6
PPT152□2J-7A4□□□□□ 
0.0015
7.0
14.0
0.6
PPT222□2J-7A4□□□□□ 
0.0022
7.0
14.0
0.6
PPT332□2J-7A4□□□□□ 
0.0033
7.0
14.0
0.6
PPT472□2J-8A4□□□□□ 
0.0047
8.0
14.0
0.6
PPT682□2J-8A6□□□□□ 
0.0068
8.0
16.0
0.6
PPT103□2JA0A6□□□□□ 
0.010
10.0
16.0
0.6
PPT153□2J-9B1□□□□□ 
0.015
9.0
21.0
0.8
PPT223□2JA1B1□□□□□ 
0.022
11.0
21.0
0.8
PPT333□2JA3B1□□□□□ 
0.033
13.0
21.0
0.8
PPT473□2JA3B7□□□□□ 
0.047
13.0
27.0
0.8
PPT683□2JA5B7□□□□□ 
0.068
15.0
27.0
0.8
PPT104□2JA6C2□□□□□ 
0.10
16.0
32.0
0.8
PPT154□2JA8C2□□□□□ 
0.15
18.0
32.0
0.8

back to top

Film