i. MPX. Metallized polypropylene film capacitor - interference suppression class-X2 |
ii. MX1. Metallized polypropylene film capacitor - interference suppression class-X1 |
iii. MPY. Metallized polyester & polypropylene film capacitor - interference suppression class-Y2 |
iv. SKC. Spark quenchers capacitor |
iii. MPY. Interference Suppression Class - Y2
MY2 are constructed with (P=10mm) polyester film dielectric, and (P=15mm) polypropylene. Internal series connection(for P≥15mm). Tinned copper wire leads, encapalated in plastic case(UL-94V0) with epoxy resin sealing, flame-retardant. Two standard lead lengths available: 6mm and 26mm. Other lead lengths available upon request.
Drawing:
Outline Drawing |
Construction |
Appearance |
![]() |
![]() |
![]() |
Features:
Specification:
Performance:
Test Characteristics | GB/T 14472 (IEC 60384-14) | Performance |
Withstand voltage: Between terminals | P≥15mm For 2700VDC 2sec P=10mm For 2500VDCD 2sec |
Shall be no abnormality |
Withstand voltage: Between terminals & enclosure | For 2.0UR+1500VAC 2 sec | Shall be no abnormality |
Insulation resistance: Between terminals | Apply rated voltage ±15% for 60 sec. When rated voltage under 100V. Apply 100V ±15% when rated voltage from 100V to 500V at 20. | ≧30,000MΩ |
Insulation resistance: Between terminals & enclosure | ||
Heat proof: Insulation resistance at 85℃ | Testing temperature: 85±2℃ | ≧30,000MΩ |
Heat proof: Rate of variation of capacitance at 85℃ | Within +5% -2% of the value before test | |
Impulse voltage | According to fig.1, before endurance | No permanent breakdown or flashover |
Endurance | According to fig.2 with U2=1000VAC Y: U1=1.7UR VAC |
Voltage proof C, DF and insulation |
Vibration | 3 directions at 2 hours each 10-500Hz at 0.75mm or 98m/s2 |
No visible damage; No open or; Short circuit |
Bump | 4000 bumps at 390m/s2 | No visible damage ; No open or Short circuit |
Change or temperature | Upper and lower rated temperature 5 cycles | No visible damage |
Solderability | Solder globule method | Wetting time for d≦0.8<1s; d>0.8<1.5s |
Passive flammability | Flame exposure time depending on severity | 3, 10 or 30s burning time depending on flammability class |
Active flammability | Surge pulses +URVAC | No flame |
Humidity | +40℃ and 9-95% R.H. | 21 or 56 days |
Dimensions:
250VAC |
|||||||
Part No. | Cap. (µF) |
Dimensions(mm) |
dv/dt V/µs |
||||
W |
H |
T |
P |
dФ |
|||
MPY102□6BA3A0□□□□□ | 0.0010 |
13.0 |
9.0 |
4.0 |
10.0 |
0.6 |
500 |
MPY152□6BA3A0□□□□□ | 0.0015 |
13.0 |
9.0 |
4.0 |
10.0 |
0.6 |
500 |
MPY222□6BA3A0□□□□□ | 0.0022 |
13.0 |
9.0 |
5.0 |
10.0 |
0.6 |
500 |
MPY332□6BA3A0□□□□□ | 0.0033 |
13.0 |
9.0 |
5.0 |
10.0 |
0.6 |
500 |
MPY472□6BA3A0□□□□□ | 0.0047 |
13.0 |
9.0 |
6.0 |
10.0 |
0.6 |
500 |
MPY562□6BA3A0□□□□□ | 0.0056 |
13.0 |
9.0 |
6.0 |
10.0 |
0.6 |
500 |
MPY682□6BA3A0□□□□□ | 0.0068 |
13.0 |
9.0 |
6.0 |
10.0 |
0.6 |
500 |
MPY103□6BA8A5□□□□□ | 0.010 |
18.0 |
12.0 |
6.0 |
15.0 |
0.8 |
500 |
MPY123□6BA8A5□□□□□ | 0.012 |
18.0 |
14.0 |
7.5 |
15.0 |
0.8 |
500 |
MPY153□6BA8A5□□□□□ | 0.015 |
18.0 |
15.5 |
8.5 |
15.0 |
0.8 |
500 |
MPY223□6BA8A5□□□□□ | 0.022 |
18.0 |
15.5 |
9.5 |
15.0 |
0.8 |
500 |
MPY273□6BA8A5□□□□□ | 0.027 |
18.0 |
18.0 |
10.0 |
15.0 |
0.8 |
500 |
MPY333□6BB6B2□□□□□ | 0.033 |
26.5 |
17.0 |
8.5 |
22.5 |
0.8 |
500 |
MPY473□6BB6B2□□□□□ | 0.047 |
26.5 |
19.0 |
10.0 |
22.5 |
0.8 |
500 |
MPY563□6BB6B2□□□□□ | 0.056 |
26.5 |
20.0 |
10.0 |
22.5 |
0.8 |
500 |
MPY683□6BB6B2□□□□□ | 0.068 |
26.0 |
21.5 |
12.0 |
22.5 |
0.8 |
500 |
MPY104□6BC1B7□□□□□ | 0.10 |
31.0 |
22.0 |
13.0 |
27.5 |
0.8 |
500 |
MPY224□6BC2B7□□□□□ | 0.22 |
32.0 |
25.0 |
15.0 |
27.5 |
0.8 |
500 |
MPY334□6BC6B7□□□□□ | 0.33 |
38.0 |
28.0 |
18.0 |
27.5 |
0.8 |
500 |