Product - Capacitors
Product - Resistors
Trading Product
Service
Wire Harness

OEM Service
The OEM department specializes designing and manufacturing capacitors. We supply kinds of capacitors. Welcome to OEM services, please tell your demand, and we will feedback in 24 hours. Please contact us: ctcheam@camelcom.com.my.

C. Polypropylene Film Capacitor Series
i. PPL. Polypropylene film capacitor - inductive-radial dipped
ii. PPN. Polypropylene film capacitor - radial dipped
iii. PPT. Polypropylene film capacitor - axial tubular

 

i. PPL. Polypropylene Film Capacitor - Inductive-radial Dipped

PPL are constructed with polypropylene film dielectric, as compare wire other types, they have a lower dielectric
absorption and much lower temperature variation in the electrostatic capacitance. They have a much higher
insulation resistance and are ideal for use in circuits where a high demands is place on the Q in RF circuits, and electronic computers.

Drawing:

Outline Drawing
Construction
Appearance

 

Features:

  • Excellent frequency and temperature characteristics
  • Small size, light weight
  • Epoxy resin vacuum-dipped enhances the mechanical strength, humidity resistance
  • Suitable for timing circuit and oscillation circuit
  • Heat resistance: 240℃±10℃ (5 seconds)

Specification:

  • Operating temperature: -40℃~85℃
  • Capacitance range:0.001μF~0.22μF
  • Capacitance tolerance:±5%(j), ±10%(K), ±20%(M)
  • Rated voltage(RV): 50/100VDC, 200/250VDC
  • Dissipation factor: 0.1% Max at 1KHZ, 25℃
  • Insulation resistance(IR):≥20000 MΩ (C≦0.1µF) ≥2000 MΩ·µF (C>0.1µF)

Performance:

Test Characteristics Test Methods JIS C 5102 Performance
Withstand voltage: Between terminals Apply 2.0 times of rated voltage for 60 sec. Charge discharge current must be 1A max Shall be no abnormality
Withstand voltage: Between terminals & enclosure Apply 2.0 times of rated voltage for 1 to 5 sec Shall be no abnormality
Insulation resistance: Between terminals Apply rated voltage ±15% for 60 sec. when rated voltage under 100V. Apply 100V ±15% when rated voltage from 100V to 500V at 20℃ ≤0.1µF ≧20,000MΩ
Insulation resistance: Between terminals & enclosure >0.1µF ≧20,000MΩ•µF
Heat proof: Insulation resistance at 85℃ Testing temperature: 85±2℃ ≧4500MΩ
Heat proof: Rate of variation of capacitance at 85℃ Within +5% -2% of the value before test
Humidity test: Appearance Temperature: 40±2 ; Humidity: 90-95% RH
Testing time: 500 +24 -0 Hrs.
Apply voltage: rated voltage. After testing, leave it for about 16 Hrs. at standard condition Withstand voltage is 175% rated voltage, 60 sec.
Shall be no abnormality
Humidity test: Withstand voltage Shall be no abnormality
Humidity test: Insulation resistance ≧15000MΩ
Humidity test: Dissipation factor 0.0015 (1.5%) Max.
Humidity test: Rate of variation capacitance Within ±5% of the value before test
Reference Standard GB 10188 (IEC 60384-13) / JIS C 5102

Dimensions:

50/100VDC
Part No. 
Cap.(µF) 
Dimensions(mm) 
dФ 
PPL102□2A-6-3□□□□□ 
0.0010
5.8
10.5
3.3
3.0
0.5
PPL122□2A-6-3□□□□□ 
0.0012
5.8
10.5
3.3
3.0
0.5
PPL152□2A-6-3□□□□□ 
0.0015
5.8
10.5
3.3
3.0
0.5
PPL182□2A-6-3□□□□□ 
0.0018
5.8
10.5
3.3
3.0
0.5
PPL222□2A-6-3□□□□□ 
0.0022
5.8
10.5
3.3
3.0
0.5
PPL272□2A-6-3□□□□□ 
0.0027
5.8
10.5
3.3
3.0
0.5
PPL332□2A-6-3□□□□□ 
0.0033
5.8
10.5
3.3
3.0
0.5
PPL392□2A-6-3□□□□□ 
0.0039
6.0
10.5
3.5
3.0
0.5
PPL472□2A-6-3□□□□□ 
0.0047
6.0
10.5
3.5
3.0
0.5
PPL562□2A-6-3□□□□□ 
0.0056
6.0
10.5
3.5
3.0
0.5
PPL682□2A-6-3□□□□□ 
0.0068
6.0
10.5
3.5
3.0
0.5
PPL822□2A-6-3□□□□□ 
0.0082
6.5
10.5
4.0
3.0
0.5
PPL103□2A-6-3□□□□□ 
0.010
6.5
10.5
4.0
3.0
0.5
PPL123□2A-6-3□□□□□ 
0.012
6.5
10.5
4.0
3.0
0.5
PPL153□2A-6-4□□□□□ 
0.015
7.5
10.5
4.0
4.0
0.5
PPL183□2A-7-4□□□□□ 
0.018
7.5
10.5
4.0
4.0
0.5
PPL223□2A-7-4□□□□□ 
0.022
7.8
10.5
4.5
4.0
0.5
PPL273□2A-7-5□□□□□ 
0.027
7.8
12.0
4.5
5.0
0.5
PPL333□2A-8-5□□□□□ 
0.033
8.0
12.0
4.6
5.0
0.5
PPL393□2A-8-5□□□□□ 
0.039
8.0
12.5
5.0
5.0
0.5
PPL473□2A-9-6□□□□□ 
0.047
9.3
12.5
5.0
6.0
0.5
PPL563□2A-9-6□□□□□ 
0.056
9.7
12.5
5.0
6.0
0.5
PPL683□2AA0-6□□□□□ 
0.068
10.0
12.5
5.5
6.0
0.5
PPL823□2AA0-7□□□□□ 
0.082
10.5
12.5
6.0
7.0
0.5
PPL104□2AA1-7□□□□□ 
0.10
11.5
13.0
6.5
7.0
0.5
PPL124□2AA2-7□□□□□ 
0.12
12.0
13.0
7.0
7.0
0.5
PPL154□2AA2-7□□□□□ 
0.15
12.0
15.0
7.0
7.0
0.5
PPL184□2AA2-8□□□□□ 
0.18
12.0
16.0
7.5
8.0
0.5
PPL224□2AA3-8□□□□□ 
0.22
13.5
16.0
8.0
8.0
0.5
PPL274□2AA4-8□□□□□ 
0.27
14.0
16.0
8.5
8.0
0.5
PPL334□2AA5A0□□□□□ 
0.33
15.5
19.0
8.5
10.0
0.5
PPL394□2AA6A0□□□□□ 
0.39
16.0
20.0
9.0
10.0
0.5
PPL474□2AA8A0□□□□□ 
0.47
18.0
21.0
10.0
10.0
0.5

200/250VDC
Part No. 
Cap.(µF) 
Dimensions(mm) 
dФ 
PPL102□2E-7-3□□□□□ 
0.0010
7.0
11.0
4.0
3.0
0.5
PPL122□2E-7-3□□□□□ 
0.0012
7.0
11.0
4.0
3.0
0.5
PPL152□2E-7-3□□□□□ 
0.0015
7.0
11.0
4.0
3.0
0.5
PPL182□2E-7-3□□□□□ 
0.0018
7.0
11.0
4.0
3.0
0.5
PPL222□2E-7-3□□□□□ 
0.0022
7.0
11.0
4.0
3.0
0.5
PPL272□2E-7-3□□□□□ 
0.0027
7.0
11.0
4.0
3.0
0.5
PPL332□2E-7-3□□□□□ 
0.0033
7.0
11.0
4.0
3.0
0.5
PPL392□2E-7-3□□□□□ 
0.0039
7.0
11.0
4.0
3.0
0.5
PPL472□2E-7-3□□□□□ 
0.0047
7.0
11.0
4.0
3.0
0.5
PPL562□2E-7-3□□□□□ 
0.0056
7.0
11.0
4.0
3.0
0.5
PPL682□2E-7-3□□□□□ 
0.0068
7.0
11.0
4.0
3.0
0.5
PPL822□2E-7-3□□□□□ 
0.0082
7.0
11.0
4.5
3.0
0.5
PPL103□2E-7-3□□□□□ 
0.010
7.0
11.0
4.5
3.0
0.5
PPL123□2E-7-3□□□□□ 
0.012
7.0
11.0
4.5
3.0
0.5
PPL153□2E-9-4□□□□□ 
0.015
9.0
13.0
5.0
4.0
0.5
PPL183□2E-9-4□□□□□ 
0.018
9.0
13.0
5.0
4.0
0.5
PPL223□2E-9-4□□□□□ 
0.022
9.0
13.0
5.0
4.0
0.5
PPL273□2E-9-5□□□□□ 
0.027
9.0
13.0
5.5
5.0
0.5
PPL333□2E-9-5□□□□□ 
0.033
9.0
13.0
5.5
5.0
0.5
PPL393□2EA1-5□□□□□ 
0.039
11.0
14.0
6.0
5.0
0.5
PPL153□2EA1-6□□□□□ 
0.047
11.0
14.0
6.0
6.0
0.5
PPL563□2EA1-6□□□□□ 
0.056
11.0
14.0
7.0
6.0
0.5
PPL683□2EA2-6□□□□□ 
0.068
12.0
14.0
7.0
6.0
0.5
PPL823□2EA3-7□□□□□ 
0.082
13.0
15.0
8.0
7.0
0.5
PPL104□2EA4-7□□□□□ 
0.10
14.0
15.0
8.0
7.0
0.5
PPL124□2EA4-7□□□□□ 
0.12
14.0
15.0
8.0
7.0
0.5
PPL154□2EA5-7□□□□□ 
0.15
15.0
17.0
8.0
7.0
0.5
PPL184□2EA6-8□□□□□ 
0.18
16.0
18.0
9.0
8.0
0.5
PPL224□2EA8-8□□□□□ 
0.22
18.0
18.0
10.0
8.0
0.5

back to top

Film